Close&Safe:冗長マニピュレータのためのC空間境界迂回による最大限のタスク保持
Close&Safe: Maximal Task Preservation for Redundant Manipulators via C-Space Boundary Detour
接触を伴う作業で障害物が計画モデルにない場合に、名目軌道を可能な限り保ちつつ、障害物区間のみC空間境界を迂回して衝突を回避する軌道修復手法を提案。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Abhigyan Singh, Manthan Goyal, Fares Abu-Dakka, Ravi Prakash
分類: cs.RO
原文アブストラクト
Contact-rich manipulation such as wiping, polishing and surface inspection specifies the task as a continuous end-effector trajectory rather than a goal pose. When an obstacle absent from the planning model intersects it, conventional planners return a collision-free path that may differ from the nominal throughout, discarding trajectory that was never obstructed. We present Close&Safe (Close to the intended task, Safe from obstacles), which decouples tracking from avoidance: the nominal is followed exactly wherever it remains feasible, and avoidance acts only on the interval where it is not, so tracking is hindered as little as the obstacle allows. On that interval we sample the configuration-space obstacle boundary within a corridor around the nominal, connect the samples into a roadmap, and search it for the detour that deviates least before rejoining the nominal at the earliest feasible configuration. We evaluate across diverse simulated obstacle configurations, physical Franka experiments, and ablations of key algorithmic components. The results demonstrate collision-free trajectory repair with localized task modification, while recovering 52.4-78% in simulation and on hardware.
関連論文
- 速度予測と終点予測を統合したロボットマニピュレーションマニピュレーション
- 物理指向の未来価値行動モデルによる動的物体操作マニピュレーション
- LAGR: タスク指向把持のための言語認識把持再ランキングマニピュレーション
- TinyARM-X:オープンソースで構成可能なトルク制御デスクトップスケールロボットマニピュレータ群マニピュレーション
- 移動マニピュレータの荷物受け渡しのための階層型アドミタンス・インピーダンス制御マニピュレーション
- タスク収束フローマッチングによる生成ロボティクスマニピュレーション
