TinyARM-X:オープンソースで構成可能なトルク制御デスクトップスケールロボットマニピュレータ群
TinyARM-X: A Series of Open-Source, Configurable, and Transparent Torque-Controlled Desktop-Scale Robotic Manipulators
低コスト(350ドル未満)で自作可能なトルク制御式デスクトップマニピュレータTinyARM-Xを提案し、10分で再構成可能な設計と動的補償によるインピーダンス制御テレオペレーションを実現した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Nicolas Kosanovic, Jean Chagas Vaz
分類: cs.RO
原文アブストラクト
Visuomotor policies have demonstrated that imprecise low-cost robots can autonomously complete complex manipulation tasks. However, most inexpensive manipulators rely on compact and rigidly position-controlled servos for actuation, which complicate simulation, operation, and safety. This work introduces TinyARM-X, a framework for easily manufacturable, configurable, and torque-controllable low-cost (<350 USD) serial manipulators. By using a single hardware/software architecture, a <7 Degree of Freedom (DoF) TinyARM can be manually reconfigured to an operational >3 DoF robot within 10 min. Actuator modeling and dynamic compensation enable torque-controlled applications like mixed-reality impedance control teleoperation and simulator force feedback rendering. Experiments include mechanical benchmarking and real-world force-aware telemanipulation. The TinyARM-7 has a payload of 33.5 g, a max speed of 0.77 m/s, and a reach of 210 mm. Moreover, with dynamic compensation, the robot has a backdrive-breakaway force of 1.4 N and a backdrive-running force of 0.7 N. Additionally, Cartesian-Impedance Control (CIC) attains a translational stiffness of >15 N/m. Lastly, the TinyARM-X stack is open-sourced to disseminate accessible desktop-scale torque-controlled robotic manipulation to the community.
関連論文
- LAGR: タスク指向把持のための言語認識把持再ランキングマニピュレーション
- 移動マニピュレータの荷物受け渡しのための階層型アドミタンス・インピーダンス制御マニピュレーション
- タスク収束フローマッチングによる生成ロボティクスマニピュレーション
- 保持基準が視覚的リカバリ性能の評価を左右する:待機制御下での協調リカバリ分析マニピュレーション
- モデル情報を活用したロバスト幾何DDPCによるフィードバック線形化軌道追従マニピュレーション
- 両腕協調のためのアクショントークン化BiCATマニピュレーション
