日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

ロボットマニピュレーション/自動設計arXiv:2611.26503

JARVIS: 回路基板を自律設計・製造・試験するエージェント

JARVIS: An Agent That Designs, Builds, and Tests Circuit Boards on Its Own

シェア:XThreadsFacebookLINEはてブBluesky

ロボットアームやPCBプリンタを統合し、デジタルツインで事前検証しながら回路基板の設計から製造・試験・改良までを人手なしで完結させる身体性AIエージェントを実現した。

詳しい要約

1. どんなもの?

- 電力電子向けの回路基板設計・製作・試験・改善ループを自律的に閉じるembodied AI agent「JARVIS」の提案 - 単一のテキスト指示から物理実験を開始し、人間の介入なしに基板を完成・評価 - 対象はpower electronics、デモはgrid-connected converter sensing用の60 Hz notch filter

2. 先行研究と比べてどこがすごい?

- 従来のpower electronics開発は人間主導のdesign, fabrication, testing, iterationに依存 - JARVISはagentがphysical design-build-test-learn loopを閉じる点を主張 - 著者らの知る限りpower electronics分野で回路基板に対してこのループを閉じた最初のシステム - 未改造のdesktop equipmentを用いる点も特徴

3. 技術・手法の肝は?

- machine-specific capabilitiesとconstraintsを保持 - robot-mounted 3D scannerでworkspaceを走査し、実行可能なdigital twinを構築 - digital twin上でrobot motions、fabrication steps、circuit behaviorを材料消費前にリハーサル - robot arm、PCB printer(導電性silver inkとsolder pasteを堆積)、pick-and-place machineを統括 - camerasとsensorsで進捗を検証し、OPAL-RT real-time simulatorとoscilloscopeで試験 - 測定に基づき設計からの逸脱を診断し、KiCadで改訂設計を生成して再リハーサル

4. どうやって有効だと検証した?

- 60 Hz notch filterのデモを実施 - 人間の介入なしでfirst-run experimentを2 h 39 minで完了し、60 Hzで50.6 dBのattenuationを達成 - digital-twin rehearsalがfabrication前に5件の問題を特定(正常な基板を誤って棄却し得たtest criterionを含む) - 実行中に遭遇したfaultも自律的に解決

5. 議論はある?

- 物理設計・製作・測定・反復改善を統合したagent駆動workflowの実現を示す - 議論の詳細や限界、汎用性については要旨からは不明 - 単一デモ(60 Hz notch filter)での評価であり、他回路への適用性は要旨からは不明

6. 次に読むべき論文は?

- OPAL-RT real-time simulatorを用いたhardware-in-the-loop試験の関連研究 - KiCadを用いた自動回路設計・PCB layout生成の研究 - digital twinを用いたrobot motion rehearsalやfabrication planningの研究 - pick-and-placeやPCB printerを含むdesktop fabricationの自動化研究 - power electronics向けself-driving laboratory / autonomous experimentationの研究

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Shibo Zhou, Tianqi Hong, Zheng Yan, He Yang

分類: cs.RO, eess.SY

原文アブストラクト

Power electronics is central to the energy transition, but developing new hardware still relies on human-led design, fabrication, testing, and iteration. We present JARVIS, an embodied AI agent that autonomously closes this loop for circuit boards. JARVIS maintains machine-specific capabilities and constraints, scans its workspace using a robot-mounted 3D scanner, and constructs an executable digital twin in which it rehearses robot motions, fabrication steps, and circuit behavior before consuming materials. A single text instruction initiates the physical experiment. Using unmodified desktop equipment, the agent coordinates a robot arm, a PCB printer that deposits conductive silver ink and solder paste, and a pick-and-place machine. It verifies progress using cameras and sensors, then tests the fabricated circuit with an OPAL-RT real-time simulator and an oscilloscope. Based on the measurements, JARVIS diagnoses deviations from the design and generates a revised design in KiCad for subsequent rehearsal. In a demonstration involving a 60 Hz notch filter for grid-connected converter sensing, JARVIS completed a first-run experiment in 2 h 39 min without human intervention, achieving 50.6 dB attenuation at 60 Hz. Its digital-twin rehearsal identified five issues before fabrication, including a test criterion that would have incorrectly rejected a functioning board. During execution, the agent also resolved encountered faults autonomously. These results demonstrate an integrated agent-driven workflow for physical design, fabrication, measurement, and iterative improvement of power-electronic circuitry. To our knowledge, JARVIS is the first system in power electronics in which an agent closes the physical design-build-test-learn loop for circuit boards.

  1. 1パナソニックHDなど、触覚に即応する両手作業AI「T-Rex」を共同開発研究・技術
  2. 2川崎重工業のロボット外販を報道新製品・発表
  3. 3Boston Dynamics、GlobalFoundriesでAtlasを試験へ 半導体製造で2027年初頭から半導体・GPU
  4. 4丸文、RealManのロボットアームやヒューマノイドを国内販売提携・買収
  5. 5NVIDIA、SC26で科学研究向けAIエージェントとHPC基盤を発表新製品・発表

PR・アフィリエイト広告

OZ GAMING(GPU搭載BTOゲーミングPC)

OZ GAMING(GPU搭載BTOゲーミングPC)の公式広告バナーOZ GAMINGで完成品PCを見る ↗
PR本紙発行元 EmplifAI