Design and Characterization of a Limb Encircling Actuator

原文アブストラクト

Lower-limb powered exoskeletons have demonstrated substantial improvements in mobility and function, but most designs place actuation components lateral to the legs or remotely at the waist or back. These configurations often extend beyond the body's natural envelope, making devices intrusive in everyday use and potentially limiting societal adoption. We posit that rethinking actuation geometry could enable exoskeletons that conform more closely to the body. Here, we explored an actuation layout in which the actuator encircles the limb in a plane orthogonal to the limb axis, potentially reducing its spatial footprint around the body. We developed the Limb-Encircling Actuator (LEA) and characterized its electromechanical properties using a custom-built testbed. The LEA also features a novel radial bearing layout with potential as a lightweight or lower-cost alternative to traditional large-diameter bearings. The actuator achieved a continuous torque density of 7.5 Nm/kg with a mass of 894 g. Despite this high torque density and innovative layout, the system remained difficult to contain close to the body. These results highlight opportunities and challenges in limb-encircling actuation and provide insights into torque-dense exoskeleton designs that could integrate more readily into everyday apparel if challenges in actuator sizing and geometry are overcome.