· Product launches· 日本語で読む
Seeed Studio lists 6+1-DOF robot arm Star Arm 102 at $200
Seeed Studio has listed the Star Arm 102 on its product page. It has 6+1 degrees of freedom, a 420 mm reach and weighs 663 grams, with a price of USD$200.00. The company touts software compatibility with the reBot Arm B601 and support for ROS 2 and LeRobot.
What happened
Seeed Studio introduced the Star Arm 102 robot arm in a listing dated April 17, 2026. The listing gives its price as USD$200.00, with 6+1 degrees of freedom, a 420 mm reach and a total weight of 663 grams. The company offers a fully assembled product and a DIY kit, and touts software compatibility with the reBot Arm B601.
Why it matters
Seeed Studio says the USD$200.00 arm is available as both a fully assembled product and a DIY kit, and supports ROS 2 and LeRobot. The product configuration appears intended for both users seeking to reduce assembly work and educators and researchers working with its structure and controls, but performance conditions such as accuracy and payload capacity cannot be assessed from the listing alone.
Analysis
The listing positions the arm through its USD$200.00 price and 6+1 degrees of freedom, as well as the choice of a fully assembled product or a DIY kit, software compatibility with the B601, and support for ROS 2 and LeRobot. By describing both an assembled option and links to development environments alongside the mechanical specifications, the company presents it as a product for educational and research use. However, these are the seller's descriptions and should be distinguished from information showing hands-on evaluation or availability.
On the mechanical side, Seeed Studio says the arm has 6+1 degrees of freedom, meets the Pieper criterion and supports analytical inverse kinematics. The listing says it uses 12-bit magnetic encoders as angle sensors, while listing only encoders for the servos. These specifications suggest a configuration intended not only for motion control but also for educational and research work with inverse-kinematics algorithms. However, the listing does not provide performance figures for accuracy, payload capacity or speed, and the conditions under which the specifications apply are limited.
In Seeed Studio lists reBot Arm B601, an open-source 6+1-DOF robot arm kit, published later by this newspaper, the B601's price and payload capacity were among the details covered. The Star Arm 102 touts software compatibility with that model, but there is no confirmation that the two products have equivalent mechanical parts or control performance. Their relative performance or suitability cannot be judged by price differences alone; the scope of software features and configurations covered by the compatibility claim will be a key point of comparison.
The company's robotics product pages continued to appear later, including Seeed Studio lists reComputer Robotics J3011 with Jetson Orin Nano in November 2026. This shows the breadth of its product listings, but does not indicate a connection with the Star Arm 102 or a shared sales or development plan. Points to verify include the availability terms for the assembled product and DIY kit, the arm's actual accuracy and payload capacity, the specific scope of compatibility with the B601, and the versions of ROS 2 and LeRobot supported.
Sources
Translated from the Japanese original: /news/seeed-studio-6-1-jiyuudo-no-robottoaamu-star-arm-102-wo-keis-008373. The Japanese version is authoritative if they differ.