Physical AI News (Japan)

Physical AI, robotics and compute — reported from Japan.

日本語
· Product launches· 日本語で読む

RoboParty lists humanoid robot RP1 specs on product page; 24/30 degrees of freedom

RoboParty’s product page lists specifications for the RP1 humanoid robot’s open-source and PRO versions. Both versions are 1.35 meters tall and have a 3-hour operating time; active degrees of freedom are 24 for the standard version and 30 for the PRO version. The versions differ in their head, end effectors and sensor configurations, reflecting a product design intended to let users choose a configuration based on their needs.

What happened

RoboParty has listed specifications on its product page for the RP1 humanoid robot’s open-source version and RP1 open-source version PRO. Both versions are 1.35 meters tall and have a 3-hour operating time. The standard version has 24 active degrees of freedom, compared with 30 for the PRO version.

Why it matters

RoboParty’s product page differentiates the RP1 standard and PRO versions not only by their degrees of freedom, but also by their standard configurations for the head, end effectors and vision sensors. This gives researchers and developers a basis for comparing configurations suited to their intended uses, while the lack of information on operating-time and speed test conditions and the scope of software availability leaves limits on performance comparisons and purchasing decisions.

Analysis

The differences between the versions go beyond simply increasing the number of degrees of freedom. The PRO version has seven degrees of freedom per arm, compared with five for the standard version, and comes standard with a six-degree-of-freedom dexterous hand and a monocular RGB camera. Its head also changes from one designed for motion control to one designed for interaction. By contrast, the versions share the same specifications for height, operating time, payload and maximum running speed. The product page thus presents differences in arm, end-effector and head configurations, rather than mobility performance, as the basis for choosing between them. In a related article, RoboParty launches RP1 humanoid robot with open hardware and software reported that the standard version is about 1.3 meters tall and has 24 degrees of freedom, while the PRO version has 30 degrees of freedom. It also described a package that opens up everything from mechanical design to learning tools. The product page referenced here lists the height as 1.35 meters, a more precise expression than the related article’s “about 1.3 meters.” There is no basis to treat the difference in figures as a specification change. Another article, RoboParty releases ROS 2 deployment framework for RPO and RP1, covered a modular framework for motor and IMU connections, inference and depth perception. Taken together with the product page’s interchangeable head and optional depth camera, this suggests a design offering choices in both hardware configuration and software deployment. However, no specific connections or compatibility between the two are indicated. A key industry question for a robot marketed as open is how far users can reconfigure its components, control systems and learning environment themselves. Because the standard and PRO versions differ in their end effectors and sensors, research evaluations will depend on whether test conditions can be standardized and on the configuration and load conditions under which the 3-hour operating time is achieved in real-world settings. The product page provides figures for running speed and payload, but does not specify test conditions, price, the scope of software availability or licensing. Assessing practical usability will require confirming the test conditions behind the specifications, the support available for each configuration and how they work with the software.

Sources

Translated from the Japanese original: /news/roboparty-seihin-peeji-de-hitogata-robotto-rp1-no-shiyou-wo-ca853c. The Japanese version is authoritative if they differ.