· Product launches· 日本語で読む
Mitsubishi Electric Demonstrates Integration of Galaxea Dynamics Humanoid and CNC Machine Tool
Mitsubishi Electric demonstrated a machining system linking a humanoid robot with a CNC machine tool at JIMTOF 2026. The system uses an AI machining task planner to receive work instructions and assign tasks to the CNC machine and robot. humanoid.guide reported that the demonstration used a robot from Galaxea Dynamics.
Key facts
- On Oct. 21, 2026, Mitsubishi Electric announced that it had developed a machining system in which a humanoid robot and CNC machine tool coordinate through physical AI.
- The system comprises three elements: an AI machining task planner, a CNC machine tool equipped with physical AI, and a general-purpose humanoid robot.
- Mitsubishi Electric’s proprietary AI technology Maisart is used in the planner and in the physical AI built into the CNC machine tool.
- Mitsubishi Electric announced that it would demonstrate the system at JIMTOF 2026, held at Tokyo Big Sight from Oct. 26, 2026.
What happened
humanoid.guide reported on Nov. 20, 2026, that Mitsubishi Electric demonstrated a machining system linking a humanoid robot with a CNC machine tool at JIMTOF 2026. In an announcement on Oct. 21, 2026, the company had described a system comprising an AI machining task planner that receives natural-language instructions, a CNC machine tool equipped with physical AI, and a general-purpose humanoid robot. According to the report, the demonstration used a robot from Galaxea Dynamics.
Why it matters
Mitsubishi Electric says its configuration, in which an AI machining task planner assigns work, simplifies connections to CNC machines that previously required dedicated communications functions and control procedures for each robot. The system targets tasks the company identifies as machine tool operator duties, including setting up workpieces and cleaning. When evaluating its use, it will be necessary to distinguish the scope of automation from actions that require human approval.
Analysis
The focus is not on investment or production volume, but on who does what in machining operations. In Mitsubishi Electric’s configuration, the humanoid is not assigned the entire job on its own; instead, a planner converts natural-language instructions into tasks and coordinates work between the CNC machine and the robot. The CNC machine also has physical AI, suggesting a design that treats the machine tool not simply as processing equipment but as part of a process that exchanges work information.
Reports on the demonstration said it showed a sequence from specifying text by voice and generating a program to placing a workpiece, machining it and removing the finished product. They also reported that human approval was required for physical actions. The automation demonstrated should therefore be assessed separately from whether the process can operate on-site without human intervention. Mitsubishi Electric said in its announcement that the system enables unattended machining, but the available reports do not make clear which actions were subject to approval during the demonstration or how approval requirements would be designed in actual operations.
This newspaper covered Galaxea Dynamics’ unveiling of the bipedal robot “Kengo” in Galaxea Dynamics Unveils Bipedal Humanoid Robot “Kengo”, and its unveiling of the wheeled dual-arm robot “Nexo” in Galaxea AI Unveils Wheeled Dual-Arm Robot “Nexo” for the First Time. This demonstration shows the company’s robot in a different context: integration into a machine tool process. However, the report did not identify the model used, so it is not possible to confirm whether it was Kengo or Nexo.
An industry question is how far a task planner and AI on the CNC side can standardize connections in response to the adoption barrier identified by Mitsubishi Electric: the need to create dedicated communications functions and control procedures for each robot. The company’s announcement said complex, individual integrations would no longer be necessary, but the operation of one robot model in a demonstration does not prove applicability to other robots or show the burden of reconfiguration when processes change. Points to watch include the range of supported robots and CNC machines, the definition of tasks requiring approval, operating performance during continuous runs, and recovery procedures for abnormal events.
Details
According to Mitsubishi Electric’s announcement, the AI machining task planner generates machining tasks from workers’ natural-language instructions, then assigns and coordinates work between the CNC machine tool and the humanoid robot. The CNC machine also has physical AI and works in coordination with the robot. Mitsubishi Electric’s AI technology Maisart is used in the planner and the CNC machine’s physical AI. Tasks identified as targets include setting up workpieces, cleaning, removing and transporting finished products, inspection and troubleshooting.
humanoid.guide, citing information from engineering.com, reported that during the demonstration, a voice instruction specified the characters to be machined on a tag, AI generated a machining program, the robot positioned the workpiece, the CNC machine carried out the machining, and the robot then removed the finished product. According to the article, human approval was required for actions that affected the physical world. As of Oct. 21, 2026, Mitsubishi Electric described its NC system based on coordination with a humanoid as “the industry’s first.”
Sources
Translated from the Japanese original: /news/mitsubishidenki-galaxea-dynamics-no-hyuumanoido-to-cnc-no-re-4fce3a. The Japanese version is authoritative if they differ.