Physical AI News (Japan)

Physical AI, robotics and compute — reported from Japan.

日本語
· Partnerships & M&A· 日本語で読む

Marubun to sell RealMan robot arms and humanoids in Japan

Marubun announced on November 19, 2026, that it had signed a domestic distributor agreement with RealMan Robotics. Products include ultra-lightweight arms, joint modules, humanoids, and teleoperation and AI data collection solutions. The product lineup includes arms that can be mounted on mobile robots and a system for using remote-operation data to train models.

Key facts

  • Marubun announced that it had signed a domestic distributor agreement with RealMan Robotics and would begin handling its products.
  • The RM series is said to have a 5 kg payload and weigh about 7.2 to 7.9 kg.
  • The RealBot series has up to 21 active degrees of freedom across the body and combines LiDAR, depth cameras and wide-angle cameras, among other sensors.
  • The teleoperation solution is said to have control latency of 50 ms or less and video latency of 120 ms or less.
  • Marubun says RealMan has capacity to produce up to 1 million joint modules annually and has obtained certification for continuous operation with an MTBF of 50,000 hours.

What happened

Marubun announced on November 19, 2026, that it had signed a domestic distributor agreement with RealMan Robotics and would begin handling its products. The lineup includes the RM series, with a 5 kg payload and a weight of about 7.2 to 7.9 kg; WHJ series joint modules; humanoids such as the RealBot series; and teleoperation and AI data collection solutions. Marubun also outlined plans to mount arms on products it handles, including Deep Robotics quadruped robots.

Why it matters

Marubun's lineup includes lightweight arms that can be mounted on mobile robots and a system that converts operating data from teleoperation into data for training. Marubun is targeting remote and autonomous work in hazardous sites. For potential customers, specific considerations include whether mobility and physical manipulation can be combined, and whether data collection can be applied to work at their sites.

Analysis

The key point of the agreement is that the product lineup goes beyond robot sales to include lightweight arms, joint modules, mobile and work platforms, and teleoperation and data collection. The RM series is said to weigh about 7.2 to 7.9 kg and have a 5 kg payload, and Marubun has also outlined plans to mount it on quadruped robots. The difference from selling standalone robots is that the sales offering can include configurations in which arms are mounted on mobile platforms, rather than only arms placed in fixed installations. However, the announcement does not establish that the products are already connected through a shared control system or data format. What can be gleaned for now, then, is not that an integrated system has been completed, but that the company plans to handle arms, humanoids, joint components, and teleoperation and data collection through the same sales channel. RealMan's stated capacity to produce up to 1 million joint modules annually points to potential component supply for integration into other robots and specialized grippers, as well as deployment of individual robots. This does not, however, indicate the volume of products Marubun will handle in Japan or its supply track record. The system for synchronizing and structuring joint torque, position coordinates and other data collected through teleoperation, then converting it into training data, is positioned as a way to connect task execution with model training. Marubun says control latency is 50 ms or less and video latency is 120 ms or less, but the announcement does not provide measurement conditions or validation results on work accuracy and safety in the field. Compared with APTO selected for the GENIAC-PRIZE 2026 student physical AI challenge, which addressed physical AI data collection through challenge design, this offering presents products and solutions for collecting operating data through real-world robot operation. There is no information indicating that the two are connected. The next points to watch are which robot configurations will actually be available in Japan, what tasks can be autonomized and to what extent when arms are mounted on quadruped robots, and under what conditions the collected data can be used for training. The announcement of a sales agreement and product specifications alone does not establish deployment numbers, operating rates in real-world use, or the performance and safety of models trained on the data.

Details

According to Marubun, the lift-type robot has an autonomous mobile chassis with a 900 mm lifting mechanism and can reach from near floor level to a maximum height of 2.4 m. The RealBot series has up to 21 active degrees of freedom across the body and is equipped with LiDAR, depth cameras and wide-angle cameras, among other sensors. The WHJ series is an integrated joint module with CAN FD communications and an absolute encoder. The teleoperation solution uses a control kit with force-feedback support. Marubun says control latency is 50 ms or less and video latency is 120 ms or less. Operating data such as joint torque and position coordinates is automatically synchronized and structured, then converted into a format for model training. Marubun says RealMan has capacity to produce up to 1 million joint modules annually and has obtained certification for continuous operation with an MTBF of 50,000 hours.

Implications for Japan

Marubun said it plans to offer RealMan products in Japan to the manufacturing, logistics and energy infrastructure sectors, as well as AI research institutions. In particular, plans to mount lightweight arms on Deep Robotics quadruped robots handled by Marubun could add an option for combining mobility and physical manipulation in areas such as infrastructure maintenance in Japan. The announcement did not disclose domestic deployment figures or the scale of product availability.

Sources

Translated from the Japanese original: /news/maru-bun-realman-no-robottoaamu-ya-hyuumanoido-wo-kokunaihan-3171a3. The Japanese version is authoritative if they differ.