· Product launches· 日本語で読む
Hidonix launches autonomous indoor surveying rover, Hido II
Hidonix Industries announced the Hido II rover for indoor surveying on Nov. 18, 2026. It follows survey routes under engineer supervision and collects geomagnetic and spatial data for ION. In the company’s comparison tests, it cut mapping time by 50% and reduced location error to as little as one-fifth compared with manual work.
Key facts
- Hidonix Industries announced the formal launch of Hido II on Nov. 18, 2026.
- Hido II has an operating time of about 5 to 8 hours, depending on the activity and operating conditions.
- Hido II is equipped with 2K stereo cameras and Ouster LiDAR.
- In Hidonix’s comparison tests, Hido II cut mapping time by 50% and reduced location error to as little as one-fifth compared with manual work using the ION app.
What happened
Hidonix Industries announced the Hido II rover on Nov. 18, 2026, to automate indoor mapping and geospatial data collection. After introducing a prototype at CES 2026, the company will offer it through a limited early access program for select U.S. facilities. Hido II collects data for ION, and the company said its comparison tests showed it cut mapping time by 50% and reduced location error to as little as one-fifth compared with manual work using the ION app.
Why it matters
Hidonix said Hido II collects geomagnetic and spatial data for ION and cut mapping time by 50% compared with manual work in its comparison tests. The system is designed to shift the collection of data for indoor navigation from a primarily manual task to repeatable rover-based work. Assessing its applicability will require more information about the test conditions and the amount of surveying performed in real-world operations.
Analysis
Hido II’s role is less about simply operating a robot indoors than automating the collection of geomagnetic and spatial data used by ION. Hidonix developed the rover in-house and combined autonomous travel along survey routes, obstacle avoidance, stair climbing and positioning of the data collection device. The reported time savings and reduction in location error also appear to reflect not just the rover’s mobility, but its ability to collect data repeatedly under the same conditions. However, the company has not provided details of the test conditions or measurement methods, so the figures cannot be applied directly to other facilities or operating environments.
The system is structured so the rover moves through a site to collect data, which is then linked to ION’s indoor and outdoor navigation. In other words, it is presented not as a standalone hardware product, but as a means of connecting mapping work with a location-information platform. The design uses an arm to keep the data collection device in a consistent position and reduce magnetic interference, apparently with the aim of maintaining consistent measurement conditions while moving. The stated operating time of about 5 to 8 hours affects not only whether it can run continuously, but also route planning and shift changes at a site. The announcement does not specify the actual survey range or daily throughput.
The sensor configuration explicitly includes Ouster LiDAR. However, Ouster reports $55 million in second-quarter revenue covers the company’s overall performance and does not indicate the number of units used in Hido II or their contribution to sales. Also, unlike Ati Robotics develops a robot with limited Chinese-made components, which addressed reducing component dependence, the Hido II announcement names a sensor but does not explain component origins or sourcing. There is no basis for treating the two as the same supply chain strategy.
The next points to watch are the terms and pricing after the limited program, actual deployment numbers, and survey times and location errors at individual facilities. It will also be important to see how ION validates and updates the data, and whether the conditions for tests comparing manual work with the rover are disclosed.
Details
Hidonix says it developed Hido II in-house and that it follows preset survey routes under engineer supervision. It detects and avoids obstacles, traverses stairs and uneven terrain, and collects geomagnetic data for ION’s indoor and outdoor navigation and spatial intelligence platform. The company gives an operating time of about 5 to 8 hours, depending on the activity and operating conditions.
The rover uses rocker-bogie suspension and is equipped with 2K stereo cameras and Ouster LiDAR. Its modular robotic arm is designed to keep the data collection device in a consistent position and reduce magnetic interference. The reported 50% reduction in mapping time and location error of as little as one-fifth are figures provided by the company; the announcement does not detail the test conditions or measurement methods.
Sources
Translated from the Japanese original: /news/hidonix-okunai-sokuryou-muke-jiritsu-roobaa-hido-ii-wo-touny-57c96c. The Japanese version is authoritative if they differ.