GAC Group's GoMate Mini introduced as a humanoid robot combining wheels and legs

humanoid.guide introduced GAC Group's humanoid robot GoMate Mini on November 7, 2026. According to the listing, it stands 170 cm tall, weighs 60 kg and has 27 degrees of freedom. It can switch among two-wheel, four-wheel and folded configurations. Its top speed is listed as 15 km/h, and its operating time on a single charge as 8 hours.

Based on the published information, GoMate Mini combines wheeled mobility configurations with manipulation capabilities such as sorting and assembly in a single robot. For potential users, determining suitability depends not only on speed and operating time but also on which configuration is used for each task and the conditions under which its capabilities were evaluated. Those conditions are not available.

GoMate Mini's distinguishing feature is its integration of a humanoid upper body with wheels at the ends of its legs, allowing it to operate in two-wheel, four-wheel and folded configurations. Rather than assessing it solely by the same measures used for robots focused on bipedal walking, the design appears to center on how wheeled mobility is combined with end-effector manipulation. However, the specifications published by humanoid.guide do not show when the robot switches between configurations or establish its performance on different surfaces or around steps. A previous article by this newspaper introduced GAC Group's humanoid robot GoMate. This latest introduction concerns a separate robot, GoMate Mini, and no materials have been provided to show design similarities or differences between the two, or the order in which they were developed. There is therefore insufficient evidence to treat it as an upgrade to an earlier model or as part of a product line; the two should simply be considered robots from the same company. The listed capabilities include obstacle avoidance, standing up after a fall, sorting products and assembling products. At the same time, overall capability is rated 4 out of 10, while navigation and manipulation are each rated 2 out of 5. The capabilities listed should therefore be considered separately from their level of achievement in actual operation. The top speed of 15 km/h and operating time of 8 hours also cannot be used as direct measures for comparing performance with other robots without information on testing conditions and load. A configuration that combines wheeled mobility and manual tasks in one robot underscores the need to evaluate its mobility and work capabilities together. However, the published information does not establish the specific conditions for sorting or assembly tasks, the scope of operation under remote control, the rate of recovery after falls, safety, or the status of mass production or deployment. It also provides no support from official specifications or evaluation methods. The figures should not be treated as verified performance; consult the original source for details.